HIBLOW Aluminum Linear Diaphragm AC Septic Air Pump (4000155)

Highlights Features Details Actual Solids CapacityNo Solids Handling Amperage (A)1.6 A Cord Length (ft.)0 ft Discharge Flow @ 0 ft. (gallons/hour)1056 Discharge Flow @ 0 ft. (gallons/min)17.6 GPM Discharge Flow @ 10 ft. (gallons/hour)0 Discharge Flow @ 10 ft. (gallons/min)0 GPM FeaturesCorrosion Resistant,Self-Priming,Thermal Overload Protection Housing MaterialAluminum Impeller MaterialAluminum Maximum Horsepower (hp)0 Maximum Pressure (PSI)3.6 PSI Maximum Working Temperature (F)180 Minimum Sump Basin Diameter10 7/8 or Less Minimum working temperature (F)32 Outlet ConnectionThreaded female Product Weight (lb.)18.02 lb Pump Switch TypeDiaphragm Vertical Lift (ft.)0 Voltage120v Warranty / Certifications Certifications and ListingsNo Certifications or Listings Manufacturer Warranty2 Year Warranty Dimensions Product Depth (in.)7.1 in Product Height (in.)7.8 in Product Width (in.)9.3 in Additional manufacturer-model retailer details Product identification BrandHIBLOW Model4000155 Product photos

The Hiblow HP-80 septic air pump is one of the most commonly used aerators for aerobic septic systems. Your aerobic septic system is able to operate efficiently when it has a powerful aerator to push oxygen into the water and get rid of sewage and effluent. This oxygen aids the waste eating bacteria that keep your system from breaking down and ensures that the water quality of your septic system is high.

The Hiblow HP-80 features clean oil-less air, boasts long operational life, offers extremely quiet operation, low vibration, low power consumption, and requires low starting current.If your Hiblow HP series pump won’t turn on when first plugged in, it may have been bumped during shipping, which may have activated the safety slide switch to the position where it deactivates the electric motor. Please refer to the owner’s manual for instructions on how to reset the safety slide switch; you can find an electronic copy of the owner’s manual on the support tab of the Hiblow website. Hiblow pumps will only operate on alternating current (AC) in order for the shuttle rod to achieve the correct back and forth motion, which creates the necessary pressure or vacuum for proper functioning. If you must operate a Hiblow pump from a DC source, an inverter would be required. All Hiblow pumps can operate on either 50hz or 60hz. Do note that the pump’s performance will vary depending on the frequency. HIBLOW linear pumps are not dual voltage; please check the label for data on the correct voltage and only apply the indicate voltage to power the pump. For best performance and longest life, your Hiblow pump should be installed in a cool, dry location out of direct sunlight. A garage, shed, or crawlspace are all optimal options. If you must install the Hiblow pump in an outside location, be sure the pump receives sufficient ventilation—in order to achieve the maximum operating life, keep any additional heat exposure to a minimum.You (the customer) are responsible for making sure you are following all applicable laws and regulations in your area before replacing your septic air pump yourself.

2 Year Warranty Covering all Manufacturer Defects 3 Year Warranty on Electrical Components ONLY

• Designed for use with aerobic septic systems
• Thermal overload protection provides reliable operation
• Quiet operation, thermal protection
• Pumps equipped with thermal overload protection
• 4.2 cfm max air flow
• 80 lpm (liters per minute) 2.13 psi
• 36 dba measured 1 meter
• 3.6 psi maximum continuous operating pressure
• Low power consumption, vibration, pulsation and starting current
• Oil-less contamination free design
• Long life, fast reliable shipments/delivery
• U.l, outdoor rating available on most HP series
• Key Features
• Specs
• Warranty
• Liters Per Min (LPM) 80 PSI (max continuous Operating Pressure) 3.6 Noise Level (dBA) @ 1 Meter 36 Current 1.6 A Rated Loading Pressure 2.13 psi Weight 15.4 lb Power Consumption 71 W Power Supply Frequency 60 Hz